PVC coated fiberglass mat is used to produce PVC sports floor. This product uses a fiberglass mat as the base material, one side of the fiberglass is evenly coated with melted PVC, then goes through the curing process. During the production of
the PVC floor, the manufacturer can use the PVC coated fiberglass mat to produce the floor, the PVC side of this product can be printed with different designs and then laminated with a wearing layer, and the fiberglass side of this product can be
laminated with PVC foaming layer. Since the PVC-coated fiberglass mat is have been coated with PVC on one side, the fiberglass side of the material can be laminated with the PVC foaming layer very well.
The PVC-coated fiberglass mat can also be used as waterproofing material, the fiberglass side of this product can apply to the bitumen and cement very well. The fiberglass mat can be 30g/m2, 40g/m2, and 50g/m2 or according to the customer's demand. And the final weight of the PVC-coated fiberglass mat can be done according to the customer's requirement.
fiberglass floor mat
Total unit weight
Tensile strength MD
Paper core diameter
1. Roll width 1m, 1.11m (±2mm); Roll length: 1300m
2. Roll diameter: 70cm (±2 0mm)
Lower unit weight, high strength, uniform surface
Significantly reduces the expansion rate of the floor
Makes the floor more suitable for heating
Increase the production efficiency of the floor and the rate of the finished product
Free of formaldehyde, environment friendly
Packing & Loading
1. Roll packaging: PE plastic film.
2. Pallet packaging: Pallets should NOT be stacked in more than 2 layers.
The pallet is free of fumigation, fumigation certificate is available.
The product will be loaded into a container in the factory. Then be delivered to the seaport, and finally shipped to the Customers' port by MSK, MSC, CMA, COSCO, YANG MING, APL, etc.
This product should be stored in a dry, ventilated and rainproof place, with temperatures from 5℃to 35℃ and humidity between 35% and 65%. It is recommended to be kept in a safe package when not used to avoid dampness.
The product in the above table is the standard type Nanjing EFG CO., LTD is delivering to customers. If the customer wants it in specific unit weight, tensile strength, roll width, and roll length, Nanjing EFG CO., LTD can produce fiberglass mat as per the customer's requirement, and offer tailored service to customers from different countries.
LC, T/T, CAD, PAYPAL, WESTERN UNION, ETC.
Nanjing EFG CO., LTD tracks the cargo of every shipment till the customer uses the fiberglass mat, and offers any help for the customer’s demand at any time.
If the customer meets any problem with technic, Nanjing EFG CO., LTD will supply relative knowledge to help the customer find the best solution, and can send a technician to the customer's factory for guidance if necessary.