Welcome to our company!

Nanjing EFG Co.,Ltd
Spunbond Nonwoven Fabric

Spunbond Nonwoven Fabric

PRODUCT DESCRIPTION Nonwoven fabric is a fabric-like material made from staple fiber (short) and long fibers (continuous long), bonded together by chemical, mechanical, heat, or solvent treatment. The term is used in the textile manufacturing industry to denote fabrics, such as felt, which are...

Product Details


Nonwoven fabric is a fabric-like material made from staple fiber (short) and long fibers (continuous long), bonded together by chemical, mechanical, heat, or solvent treatment. The term is used in the textile manufacturing industry to denote fabrics, such as felt, which are neither woven nor knitted. Some nonwoven materials lack sufficient strength unless densified or reinforced by a backing. In recent years, nonwovens have become an alternative to polyurethane foam.


Spun bonding is one of the most popular methods of producing polymer-laid nonwovens. This process is based on the melt spinning technique. The melt is forced by spin pumps through a spinneret having a large number of holes. The quench air ducts, located below the spinneret block, continuously supply the conditioned air to cool the filaments. There is also a continuous supply of auxiliary room temperature air. Over the line's entire working width, ventilator-generated under-pressure sucks the filaments and mixed air down from the spinnerets and cooling chambers.


1629361136(1)spunbond nonwoven fabric 2




1. Lightweight

2. Soft

3. Water repellent and breathable

4. Non-toxic and non-irritating

5. Antibacterial and anti-chemical agents:

6. Antibacterial properties.

7. Good physical properties.

8. environmentally friendly.


spunbond nonwoven application 0


Medical hygiene: surgical gowns, caps, covers, plaster cotton wool, women's sanitary napkins, baby diapers, wet face towels, sanitary underwear, dust cover.


Agriculture: harvest cloth, greenhouse cloth.


Industrial: floppy disk lining, speaker cloth, filter material, sound insulation felt, sealing ring lining, cable cloth, fiberglass-reinforced towel, industrial wipes, shockproof liner, insulation material, tape baseliner, pipe baseliner, ventilation duct, Shapi cloth.


Packaging: composite cement bag, luggage lining, packaging baselining, quilt, storage bag, mobile jacquard luggage cloth.


Clothing and shoes: clothing lining, flakes, hard toe lining, heel lining, underwear, artificial deerskin, synthetic leather, warm shoe lining, cloth sole lining.


Automobile industry: waste textile insulation thermal felt, shockproof felt, roof, cushion lining, carpet, car door lining, automobile filter element, molded cushion.


Household clothing: sofa inner cloth, carpet, wall cloth, lens cloth, tea bag, vacuum cleaner filter bag, shopping bag, printed bed sheet, social cover, cushion, sleeping bag, dry cleaning cloth, scouring cloth, curtain, table cloth, The lampshade is covered with a film on the back of the Mito Mat.


Civil engineering, construction: reinforcement, reinforcement, filtration, linoleum base cloth, drainage board, roof waterproof material, railway, highway, embankment, water slope, port sound insulation, sewer, heat protection, separation, drainage.


Other uses: launch vehicle, missile head heat-proof cone, tail nozzle throat lining, high-grade money printing paper, space shuttle heat-resistant tile, map cloth, calendar cloth, artificial cloth, canvas, etc.

spunbond nonwoven fabric 3spunbond nonwoven fabric 4application packaging materials



Filaments spun by melting resin chips are spread on a net directly from a spinning nozzle and randomly deposited to form a web and then bonded in the form of a sheet through thermal bonding or by other means.


A: Melt polymer chips(raw material).

B: Form filaments by spinning the molten polymer and stretching the molten filaments.C: Separate and spread fiber bundles of many filaments, and lay down the fibers on a net to form a web.

D: Bind the fibers in the form of a sheet through thermal bonding and perform embossing.

E: Perform special in-line processing such as calendar processing.

F: Wind up the sheet.

   spunbond nonwoven fabric production     2



Quality is top priority for our factory. We test every lot produced. Please be sure of our quality . 

quality control


Shrinkage film packed, then into containers, about 120,000M2/ 20” container.


This product should be stored in a dry, ventilated and rainproof place, with temperatures from 5℃to 35℃ and humidity between 35% and 65%. It is recommended to be kept in the intact package when not used to avoid damp.



transportation 1


Established in 2003, NANJING EFG CO., LTD has been professional in glass fiber and polyester fiber nonwoven mat created her vision that " Create a well-known international brand in the field of non-woven fiberglass material ", the products fiberglass mat, polyester mat, coated mat, reinforced mat are delivered to Europe, Middle East, North Africa, Asia, USA, Latin America, customer use NJEFG®, products for waterproof, filter, wall decoration, gypsum board, FRP surface, etc., quality and service are satisfied by customer.

With professional engineers and advanced producing lines, NJEFG®, always focus on offering customization to customers for special demands and developing new products for the market.

Every employee in NJEFG® has interjected faith into the daily work and life. When you cooperate with NJEFG®, you will find that you are working with a professional team with active and high efficient service, stable quality, and a memorable reputation.

company profile 2


Hot Tags: spunbond nonwoven fabric, China, manufacturers, suppliers, factory, Cotton Mat, Tissue For Sports Floor, fiberglass roofing tissue, mat construction, duct wrap, Composite Mat For Gypsum Board

Send Inquiry


No Information

Related Products