Welcome to our company!

Nanjing EFG Co.,Ltd
High Temperature Fiberglass Insulation Blanket

High Temperature Fiberglass Insulation Blanket

Battery separator tissue is produced with glass fiber and features high area weight, low DC mass resistivity, high absorption capacity, good acid resistance, low content of deoxidized KM-nO4 organic substance and low impurity as well as proper stiffness, smooth surface...

Product Details

These principles today much more than ever form the basis of our success as an internationally active mid-size business for PE Reinforced Polyester Mat, heavy duty fiberglass roof panels, fiberglass mesh fabric. We are looking forward to receiving your enquiries soon. We should pay attention to the accumulation of capital. Whether it's physical or virtual capital, it will be our eternal wealth, because these are our core competitiveness. Our advantage lies in our design, production, and sales capabilities, and diverse technologies, which will certainly meet your needs.

Battery Separator Tissue
Battery separator tissue is produced with glass fiber and features high area weight, low DC mass resistivity, high absorption capacity, good acid resistance, low content of deoxidized KM-nO4 organic substance and low impurity as well as proper stiffness, smooth surface and uniform thickness. Using this fiberglass tissue as the separator, the compound lead acid battery has the advantages of low resistivity, high porosity and large capacity, better mechanical strength and vibration resistance. The battery fixed up with this type of separator plates has stronger starting power and longer service lifetime, therefore it has become a trend to replace the traditional battery separator plate with this fiberglass one.


Technical Data  


Item

Unite

Specification



S-BT0.3

S-BT0.4

S-BT0.5

S-BT0.6

Thickness

mm

0.3±0.03

0.4±0.03

0.5±0.04

0.6±0.04

Binder Content

%

<20




Tensile Strength MD

N/5cm

≥60

≥80

≥100

≥120

Acid resistance in 15 minutes

%

≤2




Acid resistance in 72 hours

%

≤3




Thickness Variation

%

≤5




Wet Out

S

≤100

≤25

≤10

≤10

Original State Content of KMnO4 C(1/5KMnO4)=0.01/L

ml/g

≤15




CL Content

%

≤0.003




Fe Content

%

≤0.005




Mn Content

%

≤0.003




Roll Width

mm

1000±5





Customization  

Above technical dates are standard for our company. Of course we can produce as per your requirement . First , tell us your requirement or where you will use the products, then we will make samples and send you by courier. Please comment on /confirm the samples we send. We will try out best to satisfy you need.

 

The advantage of our pasting paper is better water absorption, high acid resistance, high mechanical strength and good chemical stability. Comparing cellulose pasting paper our pasting paper will not dissolved in acid, no gas will decomposed from the paper. The compression inside battery plate is stable, which guarantees high-rate discharge and long cycle life of VRLA battery.  

For the battery manufacturer if continuous grid pasting technology be used, the pasting paper should be applied. The application of pasting paper is to make the electrolyte distribute uniformly, enhanced strength of the plate, preventing the dropping of lead paste which may bring environment pollution, avoid the connection between plate and the equipment. The pasting paper can also be used as the separator of spirally wind lead fabric grid battery.


Characteristics 

High area weight

Low DC mass resistivity

High absorption capacity

Good acid resistance

Low content of deoxidized KM-nO4 organic substance

Low impurity

Proper stiffness

Smooth surface

Uniform thickness


Application

1 25


Delivery:

Mat will be loaded into container in factory, then be delivered to the sea port, finally be shipped to customers port by ships/vessels. Commonly we assure you we can make delivery two weeks on getting your confirmed order. 

4


Our services:

We are factory majored in fiberglass/poly fiber since 2006, having much experiences in this line. You can trust us for our good service, profession, prompt delivery and best price. We can offer any help any time. If you have any question /need, please contact us. 


Look at goods under production. We have 8 production lines for this item which can make sure delivery on time.

3



Our company adheres to the customer-oriented and application-oriented strategy, and continues to focus on development in the field of High Temperature Fiberglass Insulation Blanket. We are enthusiastic to provide you with satisfactory service and look forward to working with you to develop together. The maximization of company value is the trend of modern company management goals. In line with customer satisfaction is our pursuit, what customers think is our business philosophy, we warmly welcome manufacturers from all over the world to negotiate and order.
Hot Tags: battery separator tissue, China, manufacturers, suppliers, factory, Spunbond Polyester Mat, coated fiberglass fabric, Mesh Reinforced Polyester Mat, Staple Fiber, construction matts, Spunbond Fiber

Send Inquiry

Related Showrooms