Welcome to our company!

Nanjing EFG Co.,Ltd
Hongxiang Geosynthetics Gcl Bentonite Mat 6000g

Hongxiang Geosynthetics Gcl Bentonite Mat 6000g

Polyester Composite Mat ( Reinforced polyester paving mat ) has a combination structure of Polyester Mat + Fiberglass Scrim + Polyester Mat. The strong fiberglass mesh embedded into the polyester mat is the key to its performance, as reinforced polyester paving mat...

Product Details

We have professional quality management and testing. Our products are produced through strict quality control system. Our company focuses on helping our customers achieve one common goal that is to produce more quality Fiberglass Floor Tissue, Recycled Polyester Mat, Rerced Tissue For Sports Floor at a low price. We have successfully set up a professional team with a rational structure, strong technical force and excellent quality. Since our establishment, we keep on improving our products and customer service.

Polyester Composite Mat

图片8.gif


Polyester Composite Mat (Reinforced polyester paving mat) has a combination structure of Polyester Mat + Fiberglass Scrim + Polyester Mat. The strong fiberglass mesh embedded into the polyester mat is the key to its performance, as reinforced polyester paving mat extends the life of pavement overlays through the delay of reflective cracking. The Reinforced Polyester Paving Mat provides the highest tensile strength at elongation lower than 5%, making it a strong, commercially available and full coverage paving mat or fabric.

The product also serves as an effective moisture barrier equal to paving fabrics and mats. The unique, non-woven, polyester matrix structure of the Reinforced Polyester Paving Mat allows asphalt binder to fully penetrate and fill voids within the fabric, limiting moisture infiltration and preventing water from infiltrating into the granular layers of the pavement structure.

Reinforced Polyester Paving Mat creates innovative solutions to help the paving projects to go smoothly and provides superior performance on airport runway, super highway, parking area and business lots.


Technical data


Item

SPECIFICATION



Product Name

Polyester Composite Mat

Polyester Composite Mat

Polyester Composite Mat

Item NO.

PMP140/800

PMP125/500

PMP260/700

Structure

Polyester Mat +

Fiberglass scrim +

Fiberglass Mat

Polyester Mat +

Fiberglass scrim +

Polyester Mat

Polyester Mat +

Fiberglass scrim +

Polyester Mat

Area Weight (g/M2)

140±10

125±10

260±10

Polyester Mat

Weight (g/M2)

40

40

100

Width(mm)

1000

1000

1000

Mesh Open (ends/cm)

3x1.6

2.0x1.0

3.0x1.6

MD & CD yarns  (Tex)

68x136

68x136

68x136

Roll Diametermm

1180

1180

1180

Core Diametermm

152

152

152

Moisture%

0.8

0.8

0.8

Binder Content(%)

25

25

25

Tensile Strength MD

N/5cm

700

500

700

Tensile Strength CD

N/5cm

700

500

700 


Customization:

Above technical dates are standard for our company. Of course we can produce as per your requirement . First , tell us your requirement or where you will use the products, then we will make samples and send you by courier. Please comment on /confirm the samples we send. We will try out best to satisfy you need. And of course our fibre glass price is reasonable. 


Application:

Use as excellent paving mat.

1  2


Features:


◆ Delays reflective cracking 


◆ Provides a Moisture Barrier


◆ Easy installation and Less Maintenance


◆ Fully Millable and Recyclable


◆ Low risk of product shrinkage during the overlay process


◆ Tensile strength, roll length, width and area weight can be tailored according to customer’s demand. 


Instruction to use the polyester fiberglass paving mat: 

◆ Remove dirt, gravel and dust from the pavement to assure good adhesion between asphalt and pavement. 


◆ If the road is damaged, it must be repaired to make the surface of the road hard and smooth. 


◆ For a good result, the asphalt binder that will be used to adhere the reinforced polyester paving mat to the road must be hot asphalt, but not emulsified asphalt. 


◆ The temperature of hot asphalt should be between 163℃ and 204 ℃. 


◆ When the hot asphalt covered the road, the Reinforced Polyester Paving Mat must be overlaid onto the hot asphalt before the asphalt lose it’s mobility so as to assure the mat fully soaked by asphalt and effectively provides a moisture barrier.  


◆ On installation of the Reinforced Polyester Paving Mat, the air temperature must be higher than 4 ℃.


In order to achieve optimal results, here we provide some Notes on installation of Reinforced Polyester Paving Mat: 

◆ Reinforced Polyester Paving Mat must be installed on hot asphalt. We recommend the following asphalt. AC-20; PG64-22; AR8000 +, or the asphalt with penetrate rates 60-80. In extremely hot summer, we recommend to use the bitumen with high viscosity, such as AC-30; PG67-22; AR8000 +, or the asphalt with penetrate grade 40-60. 


◆ The best ratio of asphalt is 1.1 liters / square meters paving mat, but subject to the project site situation during the installation, the ratio can be between 1.0-1.3 liters / square meters. According to different thickness of the Reinforced Polyester Paving Mat, the ratio of asphalt should be adjusted. During the asphalt delivery, we do not advise to heat the asphalt with a temperature higher than 204 ℃, because this would hinder the pre-mature of liquid asphalt. 


◆ Handle the Reinforced Polyester Paving Mat with care during the installation, the paving mat will be damaged or it may cause bad result if the paving mat drop from the installation machine.


◆ During the installation, if it forms a stripe bigger than 2.5cm in any direction, the stripes must be cut and overlaid, and the two layers of paving mat must be fully covered by asphalt so as to ensure the two layers of paving mat fully soaked by the hot asphalt. Use roller to press the paving mat or use brush to clear out bubble in the paving mat to ensure the paving mat fully adhered to the road. When covering the hot asphalt to the road, the width of the asphalt should be 4 inch more than the width of paving mat. Since the paving mat can not be curved, for the winding area of the road the paving mat can be cut into several pieces and be installed to the road manually or mechanically.  


◆ For the connection of two pieces of paving mat: two layers of paving mat must be overlapped together. In the longitudinal direction the width of overlapped area must be at least 10.2cm, and in the lateral direction, the width of overlapped area must be at least 5.1cm.


◆ If the installation machine or other vehicles have to drive on the paving mat, it should not turn directions frequently nor suddenly so as to avoid damaging the paving mat. Do not scatter sand or other object on the paving mat; to avoid asphalts sticking to the tire of the machine, do not minimize the ratio of bitumen.


Packing ,Loading and Delivery:

Mat will be loaded into container in factory, then be delivered to the sea port, finally be shipped to customers port by ships/vessels. Commonly we assure you we can make delivery two weeks on getting your confirmed order. 

3


4


5


Our services:

We are fiberglass factory majored in fiberglass/poly fiber since 2006, having much experiences in this line. You can trust us for our good service, profession, prompt delivery and best price. We can offer any help any time. If you have any question /need, please contact us. 


We are a modern enterprise with many years of experience in the production of Hongxiang Geosynthetics Gcl Bentonite Mat 6000g. We are equipped with advanced equipment and testing equipment to provide users with more advanced and reliable products and better services. Our sales base and logistics center can provide customers with three-dimensional services and technical support. So far our products have been exported to many countries worldwide.

Hot Tags: polyester composite mat, China, manufacturers, suppliers, factory, Composite Paving Mat, Fiberglass Tape, Composite Mat For Gypsum Board, Fiberglass Joint Tape, Reinforced Fiberglass Mat, Fiberglass Insulation

Send Inquiry

Related Showrooms