Competitive Fiberglass Tape Dry Wall for Seam/ Crack From Manufacturer

Our company is developing towards the direction of 'unity, harmony, atmosphere and openness', and is committed to providing Reinforced Fiberglass Tissue, Battery Separator Tissue, glass fiber mesh for waterproofing with quality assurance for the groups in need. The company has a team of high-quality marketing personnel, who are responsible for product sales, quality tracking and after-sales service. At the same time, they also establish customer files and customer information feedback system. We strictly follow the principle of system reliability and system flexibility, fully combine the process requirements and characteristics, and wholeheartedly provide technical support for customers.

Product description

Fiberglass joint tape comes in rolls just as paper tape does, but unlike paper tape, a fiberglass joint tape is usually self-adhesive and can be applied directly to a seam without an undercoat of joint compound. Fiberglass joint tape is more pliable than paper tape, however, and hairline cracks can develop unless you coat fiberglass joint tape with a setting-type joint compound or hot mud. The limited working time and difficulty of sanding hot mud may present challenges for the amateur drywall finisher. When applied correctly, though, fiberglass joint tape makes a stronger joint that is less likely to develop defects than one finished with paper tape in your home drywall project.

This fiberglass joint tape has become very popular in construction and decoration for many years. When you use this fiberglass joint tissue, the wall or gypsum ceiling becomes flat and smooth at wall cracks or gypsum board joints; and you use less coating materials, saving cost and polishing time with easy construction. 

Technical data

Matt Density: Random

Tape Identification: Pale yellow color or white 

Moisture Content: 0.5%

Width: 30-50MM

Length: 75m or as per request

Characteristics

Water resistance, flexibility, softness

Resistance to aging and attack from the breakdown

Crack resistance, alkali resistance

With good cohesion

Easy to be operated

Customization 

The above technical dates are standard for our company. Of course, we can produce as per your requirement. First, tell us your requirement or where you will use the products, then we will make samples and send you by courier. Please comment on /confirm the samples we send. We will try out best to satisfy your need. And of course, our fiberglass price is reasonable.

Packing 

Every roll in plastic film or several rolls in one big plastic bag.

Storage

This product should be stored in a dry, ventilated, rainproof place, with temperatures from 5℃to 35℃ and humidity between 35% and 65%. It is recommended to be kept in the intact package when not used to avoid dampness.                                                          

Loading 

Standard export loading

How to apply drywall joint tape

( NJEFG UniTape)  This is the best choice for you. 

1    Pull out about 12 inches of the mesh tape. Starting at one end of the wall, center the tape over the drywall seam and press it firmly against the wall with your hand.

2   Grab a 4- to the 6-inch joint knife with one hand while holding the roll of mesh in the other. Press the end of the knife at a 45- to a 35-degree angle against the mesh on the wall to hold it in place.

3   Pull the roll of mesh tape back to unwind a 3- to 4-foot span while the joint knife holds the already attached mesh in place. Hold the unwound tape mesh up to the wall so it is centered over the drywall seam.

4   Slide the joint knife over the pulled-out portion of mesh tape to secure it over the drywall seam. Keep the tape centered over the drywall seam as you press it into place.

5  Stop sliding the joint knife once the 3 to 4 feet of mesh tape is attached to the wall. Hold the laid-out mesh tape in place with the joint knife again. Pull out another 3 to 4 feet of tape from the roll and follow with the joint knife.

6   Stop a run of mesh tape by using the joint knife edge to cut the tape. Hold the joint knife at a 90-degree angle from the wall and pull the tape back across the straight edge to cut the tape. Continue your next run following the same steps.

 

Our focus on should be to consolidate and enhance the quality and repair of present products, in the meantime constantly establish new products to meet unique customers' requires for Competitive Fiberglass Tape Dry Wall for Seam/ Crack From Manufacturer. We guarantee that all products are in good and normal condition, which is free from any defects in materials and workmanship complying with industry norms and standards. It is the dream of all our employees to create an excellent brand with superior service and reflect the new fashion of the industry.

Hot Tags: fiberglass joint tape, China, manufacturers, suppliers, factory, Fiberglass Roofing Mat, fiberglass carpet, pvc coated fiberglass mesh, drywall mesh tape, fiberglass insulation fireproof, PC 250 PVC Impregnated Fiberglass Mat