Composite Mat

Color polyester fiberglass mat for gypsum wallboard is produced from the mixture of glass fiber and polyester fiber by the wet layout process. Then the mat is further coated with blue color and a special binder on the surface. The combination of glass fiber and polyester fiber gives the...

The HFCP Reinforced Composite Sheet uses PP fiber and glass fiber as the main raw materials. Firstly it is produced into the composite mat by wet layout process or dry process. Then in the next process, we press the composite mat with high pressure and high temperature, and the mat becomes sheets.

The product also serves as an effective moisture barrier equal to paving fabrics and mats. The unique, non-woven, fiberglass matrix structure of the Composite Paving Mat allows asphalt binder to fully penetrate and fill voids within the fabric, limiting moisture infiltration and preventing water from infiltrating into the granular layers of the pavement structure.

This polyester fiberglass mat is specially designed for drywall/gypsum board manufacturing and paving construction companies. The polyester fiberglass mat features strong tensile strength, moisture-resistant, mold-resistant, formaldehyde Free, and good air permeability with a perfectly smooth surface.

This material is specially tailored for the gypsum board/drywall industry. It has easy soakage and good lamination to gypsum wallboard, with a flat and smooth surface. It’s a healthy and environmentally friendly material.

Compound base is a practical and economical material for bitumen waterproof membrane.

Delays reflective cracking
Provides a Moisture Barrier
Easy installation and Less Maintenance
Fully Millable and Recyclable
Low risk of product shrinkage during the overlay process
Tensile strength, roll length, width and area weight can be tailored according to customer’s demand

Polyester Composite Mat ( Reinforced polyester paving mat ) has a combination structure of Polyester Mat + Fiberglass Scrim + Polyester Mat. The strong fiberglass mesh embedded into the polyester mat is the key to its performance, as reinforced polyester paving mat...

Polyester Fiberglass Composite Mat (Polyester Fiberglass Paving Mat) is produced from the mixture of polyester fiber and glass fiber by wet lay-out process. The combination of glass fiber and polyester fiber is the key to its performance. After mixing the two...

Reinforced Cotton Mat Reinforced cotton mat is produced from recycled cotton fiber, then reinforced with fiberglass mesh. The fiberglass mesh gives very good tensile strength; the smaller the mesh size, the higher the tensile strength. So according to customer’s requirement on tensile strength...

Fiberglass Polyester Composite Mat (gypsum board composite Mat) is produced from the mixture of glass fiber and polyester fiber by wet lay-out process. The combination of glass fiber and polyester fiber is the key point to understand its performance. After...

Composite Paving Mat ◆ Delays reflective cracking ◆ Provides a Moisture Barrier ◆ Easy installation and Less Maintenance ◆ Fully millable and Recyclable ◆ Low risk of product shrinkage during the overlay process ◆ Tensile strength, roll length, width and area weight can be tailored according to...