Welcome to our company!
PRODUCT DESCRIPTION
The HFCP Reinforced Composite Sheet use PP fiber and glass fiber as the main raw materials, firstly been produced into composite mat by wet lay-out process or dry process. Then in next process, pressure the composite mat with high pressure and high temperature, the mat become sheets. This composite sheet has the advantages of low density, flame retardancy , high/low - temperature resistance, flexible and beautiful design, waterproofing, easy coating, high strength and low cost. Comparing to steel sheets or FRP boards, this composite board is characterized by light weight, impact resistance, vibration resistance, thermal insulation, size stability, easy forming, acoustic absorption, no smell, anti mildew, good toughness, corrosion resistance, flexible and low price. The surface of the sheet can be selected according to the actual requirements of different surface coverings, such as: rubber film, barrier film, decoration, hard polypropylene film, non-woven cloth, reinforced material or no coverings.
The HFCP Reinforced Composite Sheet is idea material in the field of automobile manufacture, many parts of the cars can be produced by this composite sheet including car roof, top and bottom decoration board of a,b,c column, cover plate, coat rack, outer wheel covers of four wheels , trunk cover, bottom plate of engine, back boards of seat and so on.
CHARACTERISTICS
1. light weight Flame retardant
2. Table size High/low - temperature resistance
3. Acoustic absorption Anti mildew
TECHNICAL DATA
HFCP materials specifications ( regular )
Area weight from 700-2000g/m2
Width: ≤2500mm
Length: as per request
Weight (g/m2) | Tensile strength (Mpa) | Winding (Mpa) | Density |
700 | 7.8 | 860 | 0.338 |
800 | 9 | 1215 | 0.378 |
900 | 9.5 | 1450 | 0.418 |
1000 | 15 | 1800 | 0.458 |
1200 | 18.5 | 2000 | 0.504 |
1400 | 27.5 | 2600 | 0.603 |
1600 | 40 | 3400 | 0.711 |
2000 | 47 | 4800 | 0.848 |
HFCP mechanical property (2.5 mm thick length of sheet molded at 23 degrees Celsius)
HFCP sheet | Thickness | Thickness | Thickness range |
(before compressing) | (after compressing) | of mould pressing | |
(g/m2) | (mm) | (mm) | (mm) |
600 | 1.8-2.1 | 4.0-4.5 | 1.5-3.5 |
700 | 2.5-2.8 | 4.5-5.0 | 1.5-3.5 |
800 | 2.5-3.0 | 4.7-5.2 | 1.5-4.0 |
900 | 3.0-3.5 | 5.3-5.8 | 2.0-4.5 |
1000 | 3.2-4.0 | 6.0-6.5 | 2.0-5.0 |
1200 | 4.0-4.9 | 7.2-7.7 | 2.0-6.0 |
1400 | 5.0-6.2 | 8.5-9.0 | 2.0-7.0 |
1600 | 5.5-6.5 | 9.5-10.0 | 2.0-8.0 |
1800 | 6.0-7.0 | 10.5-11.0 | 2.0-9.0 |
2000 | 6.5-7.5 | 11.0-12.5 | 2.0-11.0 |
Remark: 1. The technical data above is for reference only
2. Any special size can also be supplied according to customers' request
PACKING
Inner PE bag, Outer Cartons with Pallet
MARKETS
Nanjing EFG CO., LTD. has delivered reinforced Cement coated fiberglass mat to Middle East, North Africa customers with ensured quality and rich experience for export deliveiry.
Nanjing EFG CO., LTD welcomes cooperation from all of the world.
DELIVERY
Cement coated fiberglass mat will be loaded into container in factory, then be delivered to the sea port, finally be shipped to Customer's port by MSK, MSC, CMA, COSCO, YANGMING, APL, etc.
PAYMENT
LC, T/T, CAD, PAYPAL, WESTERN UNION, ETC.
AFTER SERVICES
Nanjing EFG CO., LTD tracks cargo of every shipment till customer uses the cotton mat, and offer any help for customer's demand in any time.
TECHNICAL SUPPORT
If customer meets any problem about technic, Nanjing EFG CO., LTD will supply relative knowledge to help customer find the best solution, and can send technician to customer's factory for guiding if necessary.
STORAGE
This product should be stored in a dry, ventilated and rainproof place,(with temperatures from 5ºCto 35ºC and humidity between 35% and 65%. It is recommended to be kept in intact package when not used to avoid damp.