Durable Fiber Glass Fire Insulation MGO Board, Building Material

We constantly encourage employees to study more advanced technology to obtain high quality Mesh Reinforced Polyester Mat, Fiberglass Mesh, fiberglass wall paneling. Looking forward, we will keep pace with the times, continuing to create new products. We meet the requirements of our customers with different degrees of specialization to the greatest extent. We are well aware that development is the eternal theme of the enterprise and the first priority of the enterprise. We always believe that only when an enterprise achieves the goal of creating reasonable profits and making good contributions to the society at the same time, can it have full significance of existence.

Product description

Polyester Fiberglass Composite Mat (Polyester Fiberglass Paving Mat) is produced from the mixture of polyester fiber and glass fiber by a wet layout process. The combination of glass fiber and polyester fiber is the key to its performance. After

mixing the two fibers together, the polyester fiberglass mat keeps good features of both fibers and minimizes shortcomings of both fibers.

The product also serves as an effective moisture barrier equal to paving fabrics and mats. The unique, non-woven, fiberglass matrix structure of the Composite Paving Mat allows asphalt binder to fully penetrate and fill voids within the fabric, limiting moisture infiltration and preventing water from infiltrating into the granular layers of the pavement structure.

Composite Paving Mat creates innovative solutions to help the paving projects to go smoothly and provides superior performance on airport runways, superhighways, parking areas,s and business lots.

Strong tensile strength makes polyester-fiberglass composite mat especially suitable for waterproofing of payments; it extends the life of pavement through the delay of reflective cracking. Polyester fiberglass composite mat also serves as an effective moisture barrier. The unique, non-woven, polyester-fiberglass structure of the mat allows asphalt binder to fully penetrate and fill voids within the mat, limiting moisture infiltration and preventing water from infiltrating into the granular layers of the pavement structure.

Polyester- Fiberglass Composite Mat creates innovative solutions to help the paving projects to go smoothly and provides superior performance on airport runways, superhighways, parking areas, and business lots.

Technical data

Remark: 1. The technical data above is for reference only   

2. Special sizes can also be supplied according to customers' request

Application 

Use as an excellent paving mat and other geotechnical material. 

   

Features

◆ Delays reflective cracking
◆ Provides a Moisture Barrier

◆ Easy installation and Less Maintenance

◆ Fully Millable and Recyclable

◆ Low risk of product shrinkage during the overlay process

◆ Tensile strength, roll length, width, and area weight can be tailored according to the client's demand. 

Delivery

The product will be loaded into a container in the factory. Then be delivered to the seaport, and finally shipped to the Customers' port by MSK, MSC, CMA, COSCO, YANG MING, APL,  etc.

Storage

This product should be stored in a dry, ventilated, rainproof place, with temperatures from 5℃to 35℃ and humidity between 35% and 65%. It is recommended to be kept in a safe package when not used to avoid dampness.                                     

Packing & Loading 

1. Roll packaging: PE plastic film.

2. Pallet packaging: Pallets should NOT be stacked in more than 2 layers.

    The pallet is free of fumigation, fumigation certificate is available.

Instruction to use the polyester fiberglass paving mat
◆ Remove dirt, gravel, and dust from the pavement to assure good adhesion between asphalt and pavement.
◆ If the road is damaged, it must be repaired to make the surface of the road hard and smooth.
◆ For a good result, the asphalt binder that will be used to adhere the Paving Mat to the road must be hot asphalt, but not emulsified asphalt.
◆ The temperature of hot asphalt should be between 163℃ and 204 ℃.
◆ When the hot asphalt covered the road, the Composite Paving Mat must be overlaid onto the hot asphalt before the asphalt lose its mobility so as to assure the mat is fully soaked by asphalt and effectively provides a moisture barrier.  

◆On installation of the Composite Paving Mat, the air temperature must be higher than 4 ℃.

Rely on 1st, devoting around the food stuff packaging and environmental safety for Durable Fiber Glass Fire Insulation MGO Board, Building Material. We study customers' drawing carefully to 100% understand the requires, then we are able to advise a more cost-effective production technology based on our rich experiences and offer clients more options for better consideration. Whether an enterprise can maintain steady operation and achieve high efficiency target depends on the choice of development strategy.

Hot Tags: polyester fiberglass reinforced mat, China, manufacturers, suppliers, factory, fiberglass tissue mat, PC 250 PVC Impregnated Fiberglass Mat, Cement Coated Fiberglass Mat 310g, fiberglass deck flooring, Reinforced Fiberglass Mat, Alu coated Fiberglass Insulation Panel