Glass or Polyester Fiber Laid Scrims for PVC Floors Backing Reinforcement and Stabilization

All we do is always associated with our tenet 'Customer first, Trust first', devoting on the food packaging and environmental protection for pvc coated fiberglass mesh, Fiberglass Tissue, mesh for drywall. Our company's goal is to make the enterprise stronger and bigger, to provide customers with more specialized and higher value-added products and services. We apply scientific and standardized management. For us, we need to capture competitive market share and maintain a steady increase in market share. Our company can quickly adapt to the diversified needs of the market and give full play to our own advantages.

 

 

 

1. High Heat Resistance – Performs well under elevated temperatures.
2. Anti-Corrosion – Resistant to chemical and environmental degradation.
3. Enhanced Mechanical Strength – Increases tensile and tear strength of bitumen membranes.
4. Extended Service Life – Prolongs the life of waterproofing membranes and paved surfaces.
5. Cost-Effective – Low-cost solution with high performance.
6. Application-Friendly – Easy to handle, cut, and install.

 

 

• Pipeline Wrapping & Protection
• Substrate material for bituminous waterproofing membranes
• Reinforcement material for sports flooring systems
• Paving mat to enhance waterproofing, anti-crack, and structural stability for highways, airport runways, and other large-scale pavement projects
• Geotextile reinforcement for infrastructure and civil engineering projects

 

 

Parameter	Unit	PF110-45P
Area Weight	g/m²	100
Polyester Mat Weight	g/m²	45
Tensile Strength (MD)	N/5cm	700
Tensile Strength (CD)	N/5cm	700
Mesh Opening	ends/cm	3 × 1.6
Roll Length	m/roll	1100
Roll Diameter	mm	760
Paper Core Diameter	mm	76 / 152
Roll Width	mm	1002
Elongation at Break	%	4
Loading (Rolls / 40'HC without pallet)	–	114
Loading Capacity	m² / 40'HC	125,400

 

 

• Roll Packaging: PE plastic film
• Pallet Packaging: Stacking ≤ 2 layers; pallets are fumigation-free with certificate available

 

Delivery：

Products are loaded into containers at the factory and shipped via major international carriers such as MSK, MSC, CMA, COSCO, YANG MING, APL, etc., to customers' ports worldwide.

 

 

• Store in a dry, ventilated, and rainproof location
• Recommended temperature: 5°C – 35°C
• Recommended humidity: 35% – 65%
• Keep in original packaging to prevent moisture damage

 

 

Standard specifications are listed above.
Customized solutions available upon request:

• Area weight
• Tensile strength
• Roll width and roll length
• Special mesh patterns or reinforcement requirements

We provide tailored solutions to meet the specific technical and market requirements of customers worldwide.

 

• Full tracking of every shipment until the product is safely used
• Technical support for product application
• On-site guidance available if required
• Assistance with installation, troubleshooting, and customized solutions

 

The company specializes in the operation and service of high-quality Glass or Polyester Fiber Laid Scrims for PVC Floors Backing Reinforcement and Stabilization, and is good at dealing with some difficult problems in practice. We pay close attention to the needs of the market and pursue perfection. Holding an honest and conscientious attitude, providing the best service, superior quality to make customers satisfied and good cooperation is our first condition.

Hot Tags: fiberglass mesh reinforced polyester mat, China, manufacturers, suppliers, factory, batt insulation material, fiberglass acoustic panels, fiberglass mat gypsum panels, non woven polyester mat, fiberglass composite panels, glass fiber reinforced asphalt