Inflaming Retarding Mould Proof Fiberglass Joint Tape

With many years of industry experience, strong market adaptability, stable and reliable product performance, and rich and complete product line, we have won a good reputation in the Fiberglass Tape, Reinforced Polyester Mat For Sports Floor, Green Polyester Mat industry, and our products have a strong competitive advantage in industry competition. We have professional production technology, senior research and development talents, adopting strict processing and testing methods, high-quality materials and advanced formulas, and our management is always increasing with the continuous changes in market demand. We deeply realize that the driving force for the survival and development of an enterprise is advanced scientific means, a scientific management system, and excellent talents. Over the years, we have continued to break through technical bottlenecks and improve the production and sales service system. Our company has established a good organization system and technical network. Our market covers the whole country and extends to many countries and regions.

Product description

Fiberglass joint tape comes in rolls just as paper tape does, but unlike paper tape, a fiberglass joint tape is usually self-adhesive and can be applied directly to a seam without an undercoat of joint compound. Fiberglass joint tape is more pliable than paper tape, however, and hairline cracks can develop unless you coat fiberglass joint tape with a setting-type joint compound or hot mud. The limited working time and difficulty of sanding hot mud may present challenges for the amateur drywall finisher. When applied correctly, though, fiberglass joint tape makes a stronger joint that is less likely to develop defects than one finished with paper tape in your home drywall project.

This fiberglass joint tape has become very popular in construction and decoration for many years. When you use this fiberglass joint tissue, the wall or gypsum ceiling becomes flat and smooth at wall cracks or gypsum board joints; and you use less coating materials, saving cost and polishing time with easy construction. 

Technical data

Matt Density: Random

Tape Identification: Pale yellow color or white 

Moisture Content: 0.5%

Width: 30-50MM

Length: 75m or as per request

Characteristics

Water resistance, flexibility, softness

Resistance to aging and attack from the breakdown

Crack resistance, alkali resistance

With good cohesion

Easy to be operated

Customization 

The above technical dates are standard for our company. Of course, we can produce as per your requirement. First, tell us your requirement or where you will use the products, then we will make samples and send you by courier. Please comment on /confirm the samples we send. We will try out best to satisfy your need. And of course, our fiberglass price is reasonable.

Packing 

Every roll in plastic film or several rolls in one big plastic bag.

Storage

This product should be stored in a dry, ventilated, rainproof place, with temperatures from 5℃to 35℃ and humidity between 35% and 65%. It is recommended to be kept in the intact package when not used to avoid dampness.                                                          

Loading 

Standard export loading

How to apply drywall joint tape

( NJEFG UniTape)  This is the best choice for you. 

1    Pull out about 12 inches of the mesh tape. Starting at one end of the wall, center the tape over the drywall seam and press it firmly against the wall with your hand.

2   Grab a 4- to the 6-inch joint knife with one hand while holding the roll of mesh in the other. Press the end of the knife at a 45- to a 35-degree angle against the mesh on the wall to hold it in place.

3   Pull the roll of mesh tape back to unwind a 3- to 4-foot span while the joint knife holds the already attached mesh in place. Hold the unwound tape mesh up to the wall so it is centered over the drywall seam.

4   Slide the joint knife over the pulled-out portion of mesh tape to secure it over the drywall seam. Keep the tape centered over the drywall seam as you press it into place.

5  Stop sliding the joint knife once the 3 to 4 feet of mesh tape is attached to the wall. Hold the laid-out mesh tape in place with the joint knife again. Pull out another 3 to 4 feet of tape from the roll and follow with the joint knife.

6   Stop a run of mesh tape by using the joint knife edge to cut the tape. Hold the joint knife at a 90-degree angle from the wall and pull the tape back across the straight edge to cut the tape. Continue your next run following the same steps.

 

The key to our success is 'Good Product Quality, Reasonable Price and Efficient Service' for Inflaming Retarding Mould Proof Fiberglass Joint Tape. Welcome to acquire a glimpse at our organization. We have rigorous industrial design concepts and perfect manufacturing style.

Hot Tags: fiberglass joint tape, China, manufacturers, suppliers, factory, Spunbond Fiber, reinforced aluminium foil, fiberglass wall paneling, reinforced aluminium foil tape, fiberglass composite panels, hepa filter glass fiber