Self Adhesive Fiber Glass Mesh Tape with Suit for Heat-Resistant

Our company's fiberglass mat gypsum panels, fiberglass roofing sheets price, heavy duty fiberglass roof panels has won the trust and praise of customers with high precision, reliable quality, reasonable price, short production cycle other competitive advantages. We hope to cooperate with you with an open attitude to maximize our interests and ultimately achieve a win-win situation. We keep adding new products, and ensure the company's economic benefits long-term development. The common vision indicates the expected goal to be achieved in a certain period of time, which is the image or scene shared by the members of the group.

Product description

Fiberglass joint tape comes in rolls just as paper tape does, but unlike paper tape, a fiberglass joint tape is usually self-adhesive and can be applied directly to a seam without an undercoat of joint compound. Fiberglass joint tape is more pliable than paper tape, however, and hairline cracks can develop unless you coat fiberglass joint tape with a setting-type joint compound or hot mud. The limited working time and difficulty of sanding hot mud may present challenges for the amateur drywall finisher. When applied correctly, though, fiberglass joint tape makes a stronger joint that is less likely to develop defects than one finished with paper tape in your home drywall project.

This fiberglass joint tape has become very popular in construction and decoration for many years. When you use this fiberglass joint tissue, the wall or gypsum ceiling becomes flat and smooth at wall cracks or gypsum board joints; and you use less coating materials, saving cost and polishing time with easy construction. 

Technical data

Matt Density: Random

Tape Identification: Pale yellow color or white 

Moisture Content: 0.5%

Width: 30-50MM

Length: 75m or as per request

Characteristics

Water resistance, flexibility, softness

Resistance to aging and attack from the breakdown

Crack resistance, alkali resistance

With good cohesion

Easy to be operated

Customization 

The above technical dates are standard for our company. Of course, we can produce as per your requirement. First, tell us your requirement or where you will use the products, then we will make samples and send you by courier. Please comment on /confirm the samples we send. We will try out best to satisfy your need. And of course, our fiberglass price is reasonable.

Packing 

Every roll in plastic film or several rolls in one big plastic bag.

Storage

This product should be stored in a dry, ventilated, rainproof place, with temperatures from 5℃to 35℃ and humidity between 35% and 65%. It is recommended to be kept in the intact package when not used to avoid dampness.                                                          

Loading 

Standard export loading

How to apply drywall joint tape

( NJEFG UniTape)  This is the best choice for you. 

1    Pull out about 12 inches of the mesh tape. Starting at one end of the wall, center the tape over the drywall seam and press it firmly against the wall with your hand.

2   Grab a 4- to the 6-inch joint knife with one hand while holding the roll of mesh in the other. Press the end of the knife at a 45- to a 35-degree angle against the mesh on the wall to hold it in place.

3   Pull the roll of mesh tape back to unwind a 3- to 4-foot span while the joint knife holds the already attached mesh in place. Hold the unwound tape mesh up to the wall so it is centered over the drywall seam.

4   Slide the joint knife over the pulled-out portion of mesh tape to secure it over the drywall seam. Keep the tape centered over the drywall seam as you press it into place.

5  Stop sliding the joint knife once the 3 to 4 feet of mesh tape is attached to the wall. Hold the laid-out mesh tape in place with the joint knife again. Pull out another 3 to 4 feet of tape from the roll and follow with the joint knife.

6   Stop a run of mesh tape by using the joint knife edge to cut the tape. Hold the joint knife at a 90-degree angle from the wall and pull the tape back across the straight edge to cut the tape. Continue your next run following the same steps.

 

We comply with the development of the market, close to the international trend, committed to providing customers with satisfactory Self Adhesive Fiber Glass Mesh Tape with Suit for Heat-Resistant. We have established long-term stable and cooperative relations with many retailers and agents, with a complete range of products. Our company takes science and technology as the forerunner, management as the foundation, and creates a brand-new operating mechanism for the market and users in accordance with the requirements of modern enterprises, thus ensuring product quality and service quality, and creating good social and economic benefits.

Hot Tags: fiberglass joint tape, China, manufacturers, suppliers, factory, hepa filter glass fiber, Fiberglass Floor Tissue, fiberglass mat gypsum sheet, non woven fiberglass, fiber polypropylene, Cement Coated Fiberglass Mat 460g