Fiberglass Needle Mat

Fiberglass needle felt is a filter material with reasonable structure and good performance. It uses fiberglass as raw material, needles the carded chopped fiberglass felt with needles, and uses mechanical methods to make the felt layer between the glass fibers, The felt layer fiberglass and the reinforced fiberglass base cloth are entangled with each other, and the fiber web is reinforced to form a felt-shaped non-woven filter material.

  Sound insulation and sound absorption

  Heat insulationfireproofhigh temperature resistant

  Thermal insulation

  Strong pull

  Uniform thickness

 1. Good thermal insulation: According to physical principles, the thermal conductivity of gas is small, and there are many air pockets inside the excellent thermal insulation material. The glass fiber needle-punched cotton has countless fine gases, and the fibers are arranged irregularly. It is an excellent thermal insulation material with a thermal conductivity of 0.035W/(m∙K);

 2. No burning: The main component of glass fiber is silicide (accounting for more than 50%), which is non-combustible, non-deformable, and non-brittle within 700 °C.

 3. Good sound absorption rate: When sound waves invade glass fiber cotton, its energy will collide with the gaps of different sizes in the fiber, thereby greatly reducing the sound wave energy.

 4. High insulation: glass fiber can withstand high temperature, has good mechanical properties and high chemical stability, so it is the best insulating material;

 5. High corrosion resistance: glass fiber is not afraid of strong acid and alkali, and will not reduce its functional characteristics for a long time;

 6. Good recovery: the glass fiber contains numerous fixed air pockets, and the recovery is excellent. Not afraid of any impact and vibration, the tensile strength is above 1.0kg.

 7. Low moisture absorption rate: The moisture absorption rate is usually close to zero.

 8. Light and soft: Compared with other heat insulation materials, glass fiber needle felt is the lightest and softest. If it is installed on the machine, it can reduce its weight and vibration load.

 9. Simple construction: the size can be cut according to the customer.

Every roll in plastic film, two rolls on one pallet （If width is above 2180mm, one roll on one pallet. ）

Fiberglass needle felt requires a ventilated, dry, and rain-proof warehouse, the humidity needs to be kept at 35% to 65%, and the temperature needs to be kept at 5°C to 35°C. When not in use, it is recommended to store in a safe package to avoid moisture.

Fiberglass needle felt will be loaded into a container in the factory. Then be delivered to the seaport, and finally shipped to the Customers' port by MSK, MSC, CMA, COSCO, YANG MING, APL,  etc.

According to the needs of customers before purchase, Nanjing EFG CO.,LTD can produce glass fiber mats on demand, and colleagues can also provide customized services for customers from different countries. We can support L/C, T/T, CAD, PayPal, Western Union and other payment methods.

After purchase, Nanjing EFG CO., LTD will track the goods of each shipment until the customer uses the fiberglass mat, and is always available to provide any assistance for the customer's needs.

If the customer encounters any technical problems, Nanjing EFG Co., Ltd. will provide relevant suggestions to help the customer find the best solution, and send technical personnel to the customer's factory for guidance if necessary. 

Hot Tags: fiberglass needle mat, China, manufacturers, suppliers, factory,