Products
Fiberglass Veil For Foam Glass
Fibreglass Veil for foam glass is specially designed as the barrier on steel belt to carry the mineral powder during the foam glass producing. Being produced with wet lay-out process, the glass fiber of this fiberglass veil is randomly laid, and the non-woven structure gives the features of an even surface, low porosity, and good tensile strength in different directions.
Features
Product description
Fibreglass Veil for foam glass is specially designed as the barrier on steel belt to carry the mineral powder during the foam glass producing. Being produced with wet lay-out process, the glass fiber of this fiberglass veil is randomly laid, and the non-woven structure gives the features of an even surface, low porosity, and good tensile strength in different directions.
The special formula and producing process used for this fiberglass veil make the veil easily absorbable by foam glass but do not disappear during the form glass producing, and forms a strong white base of the form glass.
 |  |  |
Characteristics
Good tensile strength and stiffness to carry the mineral powder on steel net.
Easy absorption by foam glass to form to become part of foam glass.
Even dispersed glass fiber forms an even base of foam glass.
Low porosity, avoid mineral powder leaking from the steel net.
Technical data
Items | Standard | Tested value |
Loss on ignition (%) | 21±3 | 22.3 |
Area Weight (g/m2) | 50±3 | 49.5 |
Tensile Strength MD (N/5cm) | 250±20 | 258 |
Tensile Strength CD (N/5cm) | 150±20 | 165 |
Air Permeability (@200Pa) (L/m2/s) | ≤ 5500 | 5409 |
Thickness (@500Pa) | 0.48±0.03 | 0.49 |
Moisture Content (%) | ≤ 0.2 | 0.11 |
Remark: 1. Width is negotiable according to the demand and container limitation.
2. Special sizes can also be supplied according to customers' demands.
3. The binder used is Urea-formaldehyde and acrylate. Formaldehyde-free version is available.
 |  |  |
Packing
Every roll in plastic film, two rolls on one pallet （If width is above 2180mm, one roll on one pallet. ）
Delivery
The product will be loaded into a container in the factory. Then be delivered to the seaport, and finally shipped to the Customers' port by MSK, MSC, CMA, COSCO, YANG MING, APL, etc.
 |  |  |
Storage
This product should be stored in a dry, ventilated, rainproof place, with temperatures from 5℃to 35℃ and humidity between 35% and 65%. It is recommended to be kept in a safe package when not used to avoid dampness.
Customization
The product in the above table is the standard type Nanjing EFG CO., LTD is delivering to customers. If the customer wants it in specific unit weight, tensile strength, roll width, and roll length, Nanjing EFG CO., LTD can produce fiberglass mat as per the customer’s requirement, and offer tailored service to customers from different countries.
Payment
LC, T/T, CAD, PAYPAL, WESTERN UNION, ETC.
Our Services
Nanjing EFG CO., LTD tracks the cargo of every shipment till the customer uses the fiberglass mat, and offers any help for the customer’s demand at any time.
If the customer meets any problem with technic, Nanjing EFG CO., LTD will supply relative knowledge to help the customer find the best solution, and can send a technician to the customer's factory for guidance if necessary.
Hot Tags: fiberglass veil for foam glass, China, manufacturers, suppliers, factory
You Might Also Like
Send Inquiry
