Glass fiber mesh cloth is based on glass fiber woven fabric coated with high molecular weight emulsion. It has good alkali resistance, flexibility, and high tensile strength in the warp and weft directions. It can be widely used for heat preservation, waterproofing, fireproofing and cracking resistance of internal and external walls of buildings. The glass fiber mesh cloth is mainly alkali-resistant glass fiber mesh cloth, which is made of medium-alkali-free glass fiber yarn (the main component is a silicate, which has good chemical stability) and is woven by a special structure-leno structure.
Afterward, it is subjected to high-temperature heat setting treatment such as anti-alkali liquid and strengthening agent. The grid cloth is woven with medium-alkali or alkali-free glass fiber yarn and coated with alkali-resistant polymer emulsion. The series of products: alkali-resistant GRC glass fiber grid cloth, alkali-resistant wall reinforcement, special mosaic mesh Sheet and stone, marble back with grid cloth
1) Wall reinforcement materials (such as fiberglass wall mesh, GRC wallboard, EPS internal and external wall insulation board, gypsum board, etc.).
2) Reinforced cement products (such as Roman pillars, flues, etc.)
3) Granite, mosaic special mesh, marble back stick mesh.
4) Waterproof membrane cloth and asphalt roof waterproofing.
5) Reinforced plastic and rubber products skeleton materials.
6) Fireproof board.
7) Grinding wheelbase cloth.
8) Geogrid for highway pavement.
9) Caulking tape for construction, etc.
|Unit weight||30g/m2, 45g/m2, 60g/m2, 75g/m2, 90g/m2, 110g/m2, 125 g/m2, 145 g/m2, 160g/m2, 300g/m2, 500g/m2|
|Size||1x1mm, 2x2mm, 3x3mm, 4x4mm, 5x5mm, 6x6mm…2x12mm|
|Width||5cm, 10cm, 1m, 1.2m, 1.5m…2.1m|
|Length||50m 100m, 200m, subject to customer's requirements.|
|Color||white, blue, green, etc.|
Each roll is packed in shrinkage film, then into containers.
The product will be loaded into a container in the factory. Then be delivered to the seaport, and finally shipped to the Customers' port by MSK, MSC, CMA, COSCO, YANG MING, APL, etc.
This product should be stored in a dry, ventilated, rainproof place, with temperatures from 5℃to 35℃ and humidity between 35% and 65%. It is recommended to be kept in a safe package when not used to avoid dampness.
The product in the above table is the standard type Nanjing EFG CO., LTD is delivering to customers. If the customer wants it in specific unit weight, tensile strength, roll width, and roll length, Nanjing EFG CO., LTD can produce fiberglass mat as per the customer’s requirement, and offer tailored service to customers from different countries.
LC, T/T, CAD, PAYPAL, WESTERN UNION, ETC.
Nanjing EFG CO., LTD tracks the cargo of every shipment till the customer uses the fiberglass mat, and offers any help for the customer's demand at any time.
If the customer meets any problem with technic, Nanjing EFG CO., LTD will supply relative knowledge to help the customer find the best solution, and can send a technician to the customer's factory for guidance if necessary.