Drywall joint tape is made of fiberglass.
It's the most ideal material for cracks repairing on the drywall, and joints strengthening on the ceilings, gypsum boards, etc.
Compared to the paper tape which is widely used on the market, it's much easier to use, has no bubbles or blisters, and can be applied directly to the wall surface without pre-embedding required. Its tensile strength is up to 400N/50mm which is much stronger than paper tape. Furthermore, it's non-organic, mold-resistant, long durability, which prevents the possible break that happens to paper tape after 3-5 years.
This fiberglass joint tape has become very popular in construction and decoration for many years.
Regarding width and length, we can produce as per your requirement. We will make the fiberglass drywall tape white, blue, yellow, and different widths according to your requirement.
Matt Density: Random
Tape Identification: Pale yellow color or white
Moisture Content: 0.5%
Water resistance, flexibility, softness.
Resistance to aging and attack from the breakdown.
Crack resistance, alkali resistance.
With good cohesion.
Easy to be operated.
Above technical dates are standard for our company. Of course, we can produce as per your requirement. First, tell us your requirement or where you will use the products, then we will make samples and send you by courier. Please comment on /confirm the samples we send. We will try out best to satisfy your need. And of course, our fiberglass price is reasonable.
Tips to apply
Repair cracks, patch holes drywall finishing-fast
Wall must be clean and dry.
Center and apply tape over the length of the joint and press firmly
Apply a generous first coat of compound over the tape, making sure to completely fill the joint crevice. When the joint has been completely filled, wipe off any excess compound with the drywall knife leaving enough to cover the tape
Let dry completely, then sand slightly
Apply sufficient thin finishing coats to produce a smooth wall surface
Special care must be taken to assure proper compound penetration of all joints.
This may result in a slight build-up of a compound that will require an increased amount of edge feathering.
Packing, loading, and delivery
Mat will be loaded into the container in the factory, then be delivered to the seaport, and finally, be shipped to the customer's port by ships/vessels. Commonly we assure you we can make delivery two weeks on getting your confirmed order.
We are a fiberglass factory that has been in line with fiberglass/poly fiber since 2006, having many experiences in this line. You can trust us for our good service, profession, prompt delivery, and best price. We can offer any help at any time. If you have any questions/needs, please contact us.